Mill Master – Mash Master – Mini Grain Mill – FREE SHIPPING AU WIDE

Rated 5.00 out of 5 based on 6 customer ratings
(6 customer reviews)

$289.95 Incl. GST

Mill like a pro with the Mill Master Grain Mill – the only geared roller mill on the market.  Brew when you want to brew with fresh cracked grains using hardened 420 Stainless Steel Fluted Rollers.  Mill Master Geared 2 Roller Grain Mill feature cutting edge design with good old fashioned reliability so you can mill your heart out and brew like a pro with consistent crush with a fully adjustable precision mill.

In stock (can be backordered)


Mill like a pro with the Mill Master Mini Grain Mill from Mash Master – the only geared roller mill on the market.  Brew when you want to brew with fresh cracked grains using hardened 420 Stainless Steel Fluted Rollers.  Mill Master Geared 2 Roller Grain Mill feature cutting edge design with good old fashioned reliability so you can mill your heart out and brew like a pro with consistent crush with a fully adjustable precision mill.

Mill Master Specifications

  • 130 mm (5″approx.) precision machined rollers
  • 39 mm (1 1/2″) diameter rollers
  • 26 flutes per roller
  • 420 Hardened Stainless Steel Rollers as Standard high corrosion and wear resistance
  • 12.7 mm (1/2″) drive shaft keyed for easy motorization, drill drive or hand crank
  • additional 3 flat triangular shank drive shaft designed to fit a 3/8 th drill chuck for improved torque and centering.
  • oil-impregnated sintered bronze bushings, carry a higher load, need less maintenance, and dampen vibration better than their rolling-bearing counterparts.
  • Strong aluminum frame
  • Built in gear guard
  • Arrives assembled

Fluted Rollers

  • Asymmetrical saw-tooth fluted rollers provide a cutting on cutting crush as used in high end commercial mill rollers
  • Flutes are angled to provide additional strength, durability and wear resistance
  • Cutting on cutting action reduced excess flour production and reduces husk damage to improving lautering.
  • Made from heat treated 420 Stainless Steel for a long service life

Roller Gap Adjustment

  • Set gap marks for ease of adjustment and repeat-ability
  • 0.0 mm to 1.9 mm infinitely adjustable gap setting for precision control and accuracy
  • 304 stainless steel the eccentric adjuster
  • Quick Adjustment side locking pins

Gear Driven Rollers

  • Gear rollers make it possible to do away with course husk ripping and tearing knurls found on other mills.
  • Only geared roller mill on the market that is fully adjustable at both ends.
  • Synchronized rollers for consistent crush which is sensitive to RPMs and differential roller speeds
  • The geared rollers ensure an easy and smooth feed of malt into the grain mill from start to finish.

Mill Master grain mills reflect 10 years of design evolution, experience and learning.

The gear driven, asymmetrical saw-toothed fluted rollers are the heart and soul of the mini mill. Some customers have removed the gears to test if it is a sales gimmick, all then have promptly reinstalled the gears after they noticed a decline in the crush quality.  Mill Master have tested the mill without gears because if they were redundant we would have removed them and passed the savings onto our customers.  The gears are not there for show, they improve the crush distribution and ensure grain feeds into the rollers every time.

Mill Master have used knurled rollers in the past which suffered from wear and less than Ideal ASBC grist distribution.  After testing dozens of fluted rollers designs they arrived at a design based on commercial mills that use a cutting on cutting saw tooth pattern. This flute pattern reduced husk damage and reduced the flour proportion in the grist.  Fluted rollers improves the stability of the grist distribution at different roller speeds. The fluted rollers deliver a more consistent grist distribution regardless the roller speed of between 120 to 530 RPM. The cutting edge of the flute is stronger than a knurled roller because it has more material behind it. Made from a durable heat treated 420 Stainless Steel.  Because even flutes on commercial 6 roller mills eventually dull after many tons and years of operation, the unique design of the mill allows you to flip the mill upside down and the roller that was the back edge /dull roller becomes the new cutting edge roller and the dull cutting edge becomes a new back edge/dull roller.  In effect increasing the service life of the mill.  We doubt the average home brewer will experience flute wear which would require flipping the mill, but a home brew shop milling tons of malt may experience this at some point in the future.

Mill Master have used sealed roller bearings in the past, which allow you to freely spin the rollers with your fingers for longer, looks cool for sure, but when milling by hand or using a motor the difference in friction and resultant torque required to power the mill is negligible.  There are no savings in motor size or muscle power that could justify the use of rollers bearings in a home brew mill. Mill Master no longer use sealed roller bearings because they simply do not withstand the high radial loads required for milling. It did take years, for power users such as home brew shops to experience roller bearing failure but it did happen.  That is why Mill Master Mini Mills use bronze bushings and not roller bearings.

Mill design has evolved over time and Mill Master value past customers as much as they value potential new customers.  Mill Master have maintained backwards compatibility whenever they can to ensure parts and serviceability in the future.

Drill or Motor Recommendations for your MashMaster Mini Grain Mill:

These two drills are the manufacturers recommendation they are both essentially the same drill to power your MashMaster Mini Grain Mill like a pro!
Three staged planetary gearbox, about 110Nm of torque (the D.C. 200-250w motor kits are only about 20Nm off memory).  Under load with full trigger pull at its lowest setting it will operate the mill at about 220RPM and highest setting 530RPM according to the tachometer on my test bench.
If you are milling commercial volumes we recommend an explosion proof 4 poll motor and a helical or spur gearbox attached by a 1/2 flexible coupling.

If at all possible mill outside or in a purpose build milling area away from your brewing house as flour dust is wonderful food for wild yeast and bacteria.

MashMaster Mini Grain Mill Videos in operation – send them in or tag us on YouTube @beercoau

Here is a video of the Mash Master Mini Mill in Operation (Full Credit as the All Black great captain Sean Fitzpatrick would say to Wagon Brewing in NZ for the upload and share on what an amazing Grain Mill the Mash Master Mini Mill is and check out the Gladfield Malt at Wagon Brewing HQ! Great Malt Milled Right = Quality Beer cheers :-).

Frequently Asked Questions:

Q:  I have received my mill and hopper I ordered from you and it certainly looks the goods!  The only thing that I haven’t figured out, is what the pin, about the size of a match is for.  Can you enlighten me?

A: The pin is actually a key, it fits the industry standard key-way on and mates with the key-seat on the 1/2” shaft.

Additional information

Weight 4 kg
Dimensions 28 x 19 x 10 cm

6 reviews for Mill Master – Mash Master – Mini Grain Mill – FREE SHIPPING AU WIDE

  1. Rated 5 out of 5

    Robert Harvie

    Purchased a Millmaster grain mill and hopper from beerco.
    After persevering with a much cheaper version for a while I am so pleased I upgraded. The mill and hopper are extremely well made but most importantly combine to mill grain effortlessly – no more stuck rollers – the gearing makes all the difference. Brewed my first beer this morning and easily hit my targets. I am a happy man! Dermott was very helpful – will certainly use beerco in future.

  2. Rated 5 out of 5


    I recently purchased a Mill Master Mini Mill. I am kicking myself for not purchasing one of these years ago. Superbly built , so easy to use , and I get fantastic results. I can easily dial in crush size depending on the grain I am using.
    Frank at Mash Master was also very helpful in supplying info on motors to use and RPM’s. Thanks guys, always a pleasure! Keep up the great work!

  3. Rated 5 out of 5


    Excellent quality, robust and easy to use. Surprisingly, the mill has also led to an impressive increase in efficiency of our milling, leading to better quality and higher volumes of beer.

  4. Rated 5 out of 5

    Jack Baxter

    I recently purchased one of these along with the hopper and the recommended drill, I was amazed at the quality of the mill, precision built and so heavy and solid, but best of all, it does a perfect job of what it was built for, milling the grain.
    Even grain that doesn’t appear to be be crushed, on closer inspection is broken open and that’s all it needs to be. I couldn’t find any that had escaped the fluted rollers.
    I would recomend this to anyone wanting to purchase a mill, you will probably never have to buy another in your life time.

  5. Rated 5 out of 5

    Dave at Mogul

    Recently purchased this brilliant piece of engineering.Excellent adjustments via dials and works on grain cracking without issue.The set up aligning with keyway and motor drive took a little bit of time as the unijoint needs to be filed out to accomodate the keyway.No drama though and this set up works like a Trojan.

  6. Rated 5 out of 5


    Fantastic product, best on the market for quality and reliability. Easy to adjust and quality of the crush is second to none.

Add a review

Your email address will not be published. Required fields are marked *

You may also like…

  • Mill Master Hopper

    Rated 4.50 out of 5
    $67.95 Incl. GST
    Add to cart
  • Gladfield Wheat Malt

    $17.49$69.95 Incl. GST
    Select options
  • Gladfield Pilsner Malt

    Rated 5.00 out of 5
    $16.95$64.96 Incl. GST
    Select options
  • Gladfield American Ale Malt

    Rated 5.00 out of 5
    $16.95$64.94 Incl. GST
    Select options